ROYUAN Clock Spring 4E0953541B for Audi A4 B6/B7 A6 C5/C6 A8 D2/D3 Q7 4L / Seat Exeo – Airbag Spiral Cable Without Sensor
ROYUAN
Premium Aftermarket Auto Parts – Safety & Reliability
Product Description – ROYUAN Clock Spring 4E0953541B for Audi A4/A6/A8/Q7 / Seat Exeo Without Angle Sensor
🔍 IMPORTANT – PLEASE READ
This ROYUAN clock spring (airbag spiral cable) is a critical safety component located behind the steering wheel. It maintains continuous electrical connection for the driver's airbag (SRS), horn, and steering wheel controls as the steering wheel turns.
⚠️ CRITICAL: Part numbers NOT verified in manufacturer catalogs. Fitment not guaranteed without physical comparison. Always visually compare the connector shape, pin configuration, and appearance with your original part before ordering. For 100% confirmation, contact us with your VIN or clear photos of your original clock spring.
OEM Reference (Unverified): 4E0953541B.
⚠️ NOTE: This is a standard clock spring without steering angle sensor. It is intended for vehicles that do not require steering angle data for ESC, adaptive headlights, or other driver assistance systems. If your vehicle is equipped with those features, a different part number with angle sensor may be required.
Return Policy: This electrical component is not returnable once installed. Please ensure compatibility before purchase.
Compatible Vehicles
| Make | Model / Chassis | Approx. Years | Notes |
|---|---|---|---|
| Audi | A4 (B6, B7) | 2000–2008 | Sedan, Avant, Cabriolet. Without angle sensor. |
| Audi | A6 (C5, C6) | 1997–2011 | Sedan, Avant, Allroad. Verify original part. |
| Audi | A8 (D2, D3) | 1994–2010 | Standard clock spring. Verify connector. |
| Audi | Q7 (4L) | 2005–2015 | SUV. Without angle sensor. |
| Seat | Exeo / Exeo ST | 2009–2013 | Based on Audi A4 B7. Same clock spring. |
Technical Specifications
- Brand: ROYUAN – Premium aftermarket manufacturer
- Function: Clock spring / Airbag spiral cable (Without steering angle sensor)
- Placement: Steering column, behind steering wheel
- Material: High-strength copper ribbon, flame-retardant ABS plastic housing
- OE Number (Reference): 4E0953541B
Key Functions
✅ Airbag (SRS) system activation – critical safety component
✅ Horn operation
✅ Steering wheel controls (audio, cruise, if equipped)
Signs of Failure
⚠️ Airbag warning light on dashboard
📢 Horn does not function
🎛️ Steering wheel controls unresponsive
🔊 Clicking/scratching noise when turning
🚨 Driver airbag may not deploy in collision
⚠️ IMPORTANT SAFETY NOTE & INSTALLATION TIPS
Before Installation: Disconnect battery negative terminal and wait at least 10 minutes for airbag discharge. Follow Audi safety procedures.
Centering: Keep front wheels straight. Do NOT remove centering clip until fully installed. If needed, turn rotor clockwise to stop, then back approximately 2.5 turns to center.
Verification: Compare connectors/pins with original. Provide VIN or photos for confirmation. This is the standard version without angle sensor – not suitable for vehicles with adaptive cruise, lane assist, or dynamic steering.
Post-Installation: Test horn, steering controls, and ensure airbag warning light turns off. Use diagnostic tool to clear faults if required.
Professional Installation: Strongly recommended due to airbag system risks.
Quality You Can Trust
- High-purity copper ribbon – stable signal
- Flame-retardant housing – safety certified
- 300,000-cycle endurance test (-40 C to +85 C)
- Centering clip included – do not remove early
- 1-year warranty
Package Includes: 1 x ROYUAN Clock Spring Assembly (with centering clip), installation guide on request.
